CARBONX™ PLA+CF

$ 80.00 AUD

750g

$ 80.00 AUD

Product Details

CarbonX™ CFR-PLA is an improved CF reinforced 3D printing filament vs. the competition. Made using High-Modulus Carbon Fiber (not carbon powder or milled carbon fiber). This filament is ideal for anyone that desires a structural component with high modulus, excellent surface quality, dimensional stability, light weight, and ease of printing. Made in the USA using premium Natureworks PLA and high modulus carbon fiber.

Material Attributes

Our AquaTek® X1 Water Soluble Support works great with CarbonX™ CF-PLA and allows you to print parts with complex geometries and then dissolve away the support in warm water.  

NO heated bed required!  

CarbonX™ CFR PLA is suitable for use in practically any desktop 3D Printer.  Please note - carbon fiber reinforced filaments are abrasive and can wear out a brass or aluminum nozzle.

Recommended Print Settings

  • Extruder:  190-220°C.  
  • Bed Temp:  23 - 60°C  (Heated bed NOT necessary)  
  • Bed Prep:  3DXTech Blue Painters Tape, PVA-based Glue, Hairspray on clean glass
  • Nozzle: We strongly recommend a 0.4mm orifice or larger
  • Layer Height:  Ideal layer height is 60% of nozzle diameter.  We do not recommend printing layers below 0.25mm with carbon fiber grades.  Lower than 0.25mm may create too much back pressure in the hot end and result in poor feeding, jams, drive gear clicking, and eating a notch into the filament.
  • Support:  Our Aquatek water soluble support works great to create complex parts.

Back to Filaments

Phone Number

0401 317 743

Contact

chris@project3d.com.au

Get a free quote

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form